Philips Car Video System CED370 User Manual

Register your product and get support at  
CED370  
EN  
Quick Start Guide  
 
c
1
2
3
4
5
6
7
8
9
0
!
"
§
 
2
a
m
5m  
183 mm  
53.5mm  
b
c
 
d
e
f
 
3
4
 
5
 
English  
3 Remove the two transport screws on the  
b
top of the unit.  
4 Remove the mounting sleeve with the  
c
Install the car audio  
removal keys.  
These instructions are for a typical installation.  
However, if your car has different requirements,  
make the corresponding adjustment. If you have  
any questions regarding installation kits, consult  
your Philips car audio dealer.  
5 Install the sleeve into the dashboard and  
d
bend the tabs outward to fix the sleeve.  
6 Place the rubber cushion over the end of  
e
the bolt.  
7 Slide the unit into the dashboard until a  
f
click sound is heard.  
1
Connect wires  
8 Reconnect the negative terminal of the car  
battery.  
1 Pull out the ISO connectors from the car  
dashboard and connect them to the bigger  
a
end of the supplied standard connector.  
2 Connect the other end of supplied  
Turn on  
b
standard connector to the unit.  
1 Press to turn on the unit.  
c
If necessary, connect the following:  
»
The available OSD (On-Screen Display)  
languages display.  
Connector  
Blue cable  
Connect to/with  
Sub woofer out  
1
2
Green/white  
wire  
Parking (see ‘Connect  
parking brake wire’ on  
page 16) switch (see  
‘Connect parking brake  
wire’)  
3
4
5
6
7
8
9
White cable  
Red cable  
Left front line out  
Right front line out  
Left rear line out  
Right rear line out  
Camera  
White cable  
Red cable  
2 Touch a language to select.  
The OSD language changes to the  
selected language immediately.  
Pink wire  
»
Yellow cable  
Yellow cable  
Camera in  
Video in  
To turn off the unit, press and hold for  
more than 2 seconds.  
10 Yellow cable  
11 Yellow cable  
12 White cable  
13 Red cable  
Video out 2  
Video out 1  
Left audio in  
Right audio in  
Set clock  
1 Touch to display main menu.  
2 Touch [Setting] to display setting menu.  
3 Touch [Time].  
2
Mount in the dashboard  
1 If the car does not have an on-board drive  
or navigation computer, disconnect the  
negative terminal of the car attery.  
4 Touch [Clock Mode] to switch between  
clock mode options.  
2 Ensure that car dashboard opening is within  
5 Touch [Set Time].  
a
these measurements:  
 
6 Touch  
/
to adjust each setting.  
Remove the USB device  
7 Touch to exit time setting menu.  
1 Press to turn off the unit.  
2 Remove the USB device.  
Listen to Radio  
5
Insert SDHC card  
1 Touch to display main menu.  
2 Touch [Radio].  
1 Press to open the front panel.  
2 Insert the SDHC card into the card slot.  
»
The unit starts playing from the SDHC  
card automatically.  
Remove the SDHC card  
1 Press to turn off the unit.  
2 Press the card until you hear a click sound.  
3 Touch [FM] repeatedly at the right-lower  
»
The card is now disengaged.  
corner to switch among the band options.  
3 Remove the card.  
4 Touch / to tune to a radio station  
manually.  
To tune to a radio station automatically,  
touch and hold / more than 1 second.  
Play with Bluetooth device  
Pair the Bluetooth-enabled devices  
3
Play disc  
The first time you connect your Buetooth device  
to the unit, you need to pair the device to the  
unit. Pairing needs only to be done once.You can  
pair up to eight devices.  
You can play video, audio or images stored on the  
following discs:  
DVD video, DVD-R, DVD-RW  
VCD  
1 Turn on the Bluetooth function on your  
device.  
Audio CD, CD-R, CD-RW  
2 Search for Bluetooth device with your  
1 Press to open the front panel.  
device.  
2 Insert the disc into the disc slot with label  
3 Select “CED370” in the pairing list.  
4 Enter default password “0000”.  
side facing up.  
3 Close the front panel.  
To remove the disc, press the button.  
Make a call  
1 Pair the phone with the unit.  
4
Play USB device  
2 Touch > [Media] > [BT] to access phone  
call menu.  
1 Slide the USB socket cover to the left.  
2 Insert the USB device into the USB socket.  
3 Touch  
/
to navigate through the options  
under this menu.  
 
4 Touch on an option to access all the calls or  
numbers under this option.  
5 Touch on a call.  
Or touch to enter number directly, then  
touch green  
to dial.  
Receive call  
By default, all incoming calls are received  
automatically.  
1 If there is incoming call, [Incoming call...]  
flashes on the screen. Speak into the  
Bluetooth microphone.  
2 When conversation ends, touch  
(red)  
to terminate the call.  
 
© 2010 Koninklijke Philips Electronics N.V.  
All rights reserved.  
CED370_00_QSG_V1.0  
 

Philips Baby Playpen PT 5322 User Manual
Philips Clock Radio AJ3540s User Manual
Philips DVD VCR Combo DVP3055V 01 User Manual
Philips Pole Saw 512 MT User Manual
Pioneer Stereo System CDX FM1279 User Manual
Planet Technology Telephone IPX 2000 User Manual
Poulan Chainsaw 530163652 User Manual
Poulan Snow Blower PR8527ESA User Manual
Poulan Trimmer TE400 LE User Manual
PYLE Audio Car Video System PLDVD178USB User Manual